This cast style design is very attractive and comes complete with a built-in remote control and heat circulating blower.  Costs 100's of dollars less than competitive cast iron stoves.

                                                              • Remote control - includes hand held remote control and receiver

                                                              • Built-in manual back-up valve for use during power outages

                                                              • Includes built-in heat circulating fan

                                                              • Large glow style fibre log set

New modified version for 2008 (22,000 Btu's) -

• Natural - SSU220RHN
• LP - SSU220RHL

Remote Control Operation (for this stove only):
1. Remove front access control panel.
2. Never touch the button on the left side.
3. Turn the control knob to the off position.
4. Unplug the unit and plug it back in.
5. Take the batteries out of the Remote and put back in.
6. Wait 5 minutes.
7. Put the control knob in the electric position.
8. Sit on the floor right in front of the unit.
9. On the remote put the burner in auto.
10. Push the ign/off button. The pilot should light.
11. Wha ever temp. your remote comes on at move the temp. up or down with the remote to the desired temp.
12. Say it comes up at 77 degrees and you want to go to 75, every time you push the up or down button you should hear a beep.
13. If you do not hear a beep your control module is not receiving the information